Prototype will demonstrate downstream capability to network with program of record exercise control systems in distributed manner (i.e., multiple devices can be controlled at once), and provide sense/replay capabilities (if applicable) to be executed within training-relevant timelines (i.e., processing for replay fast enough to enable tactical mimic of signals). 5. Improved data communications have application across multiple technology areas, including telecommunications worldwide. 2. Cracking of the ceramic layer is detected using an x-ray machine while delamination is detected through a manual tap test. PHASE I: Develop concepts for Autonomous Narrow and Confined Space Convoy Operations, detailing required sensors, transition between operating modes (path widths), fault tolerance, and failure modes. PHASE II: Build a hardware prototype and demonstrate DVE mitigation capability. Pulse Secure Client Installation Overview, Launching Pulse Secure Client from the Pulse Server Web Portal. Gurton K, Yuffa A, Videen G. Enhanced facial recognition for thermal imagery using polarimetric imaging. 1306, pp. Kurchuk et al. 4. Personnel at the issuing facilities who are responsible for monitoring hard armor before re-issuing the gear to Marines would use the products to test each hard armor plate for defects. The sensor must operate in temperatures between -40 F (-40 C) and 450 F (232.22 C) and be compatible with MIL and DoD Lubricant Specifications. For this reason, you should use the agency link listed below which will take you directly to the Access the web address for DIBBS at https://www.dibbs.bsm.dla.mil, then select the Tech Data Tab and Log into c-Folders. Further, proposed efforts must be judged to be at a Technology and/or Manufacturing Readiness Level (TRL/MRL) 6 or less, but greater than TRL/MRL 3 to receive funding consideration. Battelle Memorial Inst Columbus Oh Columbus United States. This SBIR topic covers the electronics design, fabrication, and packaging for this class of EM sensor. This task will produce the first deliverable, a functioning prototype of the ncLVSM that acquires observable LDV signals from an inanimate phantom. Verbist, J., Verplaetse, M., Srivinasan, S. A., De Heyn, P., De Keulenaer, T., Pierco, R., Vaernewyck, R., Absil, P., Torfs, G., Yin, X., Roelkens, G., Van Campenhout, J., & Bauwelinck, J. PSAL is not able to validate the VPN server's cert hash, hence it is failing for you. By enhancing satellite data, orthorectification, and georectification algorithms, the observation cone can be increased allowing for a wider FOR with validated accuracy. o Capable of running off of both a standard military 2590 or 2557 Lithium battery and 120/240 VAC (power source should not be included in dimension and weight requirements) Ardizzone, E.; Bruno, A.; Gugliuzza, F. and Pirrone, R. A Low Cost Solution for NOAA Remote Sensing. SENSORNETS, January 2018, pp. OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Space Technology;Trusted AI and Autonomy The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. OBJECTIVE: Design and build an electrically thin electromagnetic (EM) skin to absorb, scatter, and change the polarization of undesirable radio frequency (RF) radiation providing spectrum camouflage for Army antennae and radar systems. OBJECTIVE: Open source hardware and software offer new opportunities for creating high assurance computing. 6. KEYWORDS: Quantum; photonic integrated circuits; quantum sensors; lasers; photonics; quantum sensor, OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Biotechnology; Quantum Science PHASE II: Fully develop and optimize the Phase I approach. 4. 4, December 2010. https://iopscience.iop.org/article/10.1088/2043-6262/1/4/043004/meta Phase I Base amount must not exceed $290,000 for a 12-month period of performance. PHASE III DUAL USE APPLICATIONS: This technology can be used for multiple military technologies such as inertial sensors (accelerometers, gyroscopes), gravity gradiometers, magnetometers and atomic clocks and has a dual use for the same applications in the commercial section. Provide experimental work that shows the technology concept will rapidly inflate the LPU in water without user input. If you want a Web install that has customized settings, you can do any of the following: Note: A Pulse installation causes a restart of active network connections on a Windows endpoint. Include prototype plans to be further developed under Phase II (e.g., associated documentation; i.e., initial block diagram, schematic, capabilities description). 2. Berger, David H. Executive Agents Planning Guidance 2020 Intermediate Force Capabilities Bridging the Gap Between Presence and Lethality. U.S. Department of Defense Non-Lethal Weapons Program, March 2020. https://mca-marines.org/wp-content/uploads/DoD-NLW-EA-Planning-Guidance-March-2020.pdf REFERENCES: 1. C. Vezyrtzis and Y. Tsividis, Processing of signals using level-crossing sampling, Jun. Terminal Services. Considering the fact that pulse secure is not good for Netflix would probably reduce the target market. 11. Connections between fluid lines, which can range in size from 0.25 in. The information and research conducted during the Phase 1 will be delivered as a final report. 4. OBJECTIVE: The objective of this topic is to develop applied research towards higher density handheld radio batteries. o Static IP addresses for the LAN, MANET radio, and ATAK Server EcoMat, e12180. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws. PHASE II: Execute growth, characterization, and fabrication plans developed during the Phase I program. Such environments include low light, fog, dust, rain, snow, and other visual obscurants. The selected contractor must be able to acquire and maintain a secret level facility and Personnel Security Clearances. Any and all products mentioned are for informational purposes only and are not an endorsement by DTRA, the DoD, or U.S. government. Please see note in the Description paragraph. The Operating temperatures between -10 and 40 degC Telephonics. 32168-32183. 6. The Pulse Connect Secure VPN is not your common VPN service. In 2003, Tsividis published his research work on the benefits of continuous time systems: no quantization error, no discrete time lag, and no frequency aliasing [2]-[3]. https://www.airforce-technology.com/projects/miniature-air-launched-decoy-mald-flight-vehicle/ Support MTC-A/X for testing and validation to certify and qualify the capability for Navy use. PHASE II: Fabricate two to three prototype systems for evaluation. A Microsoft LifeCam video camera and Ricoh G800SE digital camera capture imagery and focal length augmented by laser range finder distance measurements. Work produced in Phase II may become classified. A plan should also be submitted outlining the approach for scaling the system to meet Phase II requirements. PHASE III DUAL USE APPLICATIONS: Continue to mature the technologies developed in Phase II for potential dual-use applications that require ranging. A solution to this problem would enable any user to utilize personal devices, such as mobile devices and personal computers, to access Army resources, while still providing the Army with a dynamic risk analysis that help protect Army resources from being accessed from untrustworthy devices. PHASE III DUAL USE APPLICATIONS: The work has a broad range of applications for military reconnaissance and mission planning. 2. The device architecture should focus on simplifying and streamlining the manufacturing of a scalar gradiometric magnetometer that already meets DoD-relevant performance specifications. If the data is incomplete, or not available, the effort will require reverse engineering. Pulse Application Launcher version 9.1.1955, Pulse Secure Setup Client 64-bit Activex Control 2.1.1.1, Pulse Secure Setup Client Activex Control 2.1.1.1. Waste Management and Spadaccini, C.M. Adding additional sensors, such as additional cameras, LIDAR/RADAR, or SONAR is acceptable but cost and logistical burden will also be considered. This means we will always have less than 100% recovery for an artificial plume with a known mass. Additional details will be provided to firm once selected. 6. (q) operate after exposure to typical fixed-wing ejection seat aircraft vibration levels (frequency range of 5 Hz-2000 Hz), A capability is needed to coordinate between taskable and fixed trajectory platforms that optimizes taskable ISR platform inventory management to reduce coverage gaps in collection of data and provide sufficient collection of tactical data in a timely manner to meet the Commanders intent of responsiveness during dynamic over-the-horizon (OTH) requirements. The IFN architecture may contain off-board targeting systems and must be capable of accepting a targeting Cue from any higher-level Search and Track sensor without consuming additional sensor resources. Normally, they log on to Pulse Secure via the web interface and then select their PC, which is then forwarded via the terminal server service," a customer reported on the Pulse Secure forums. Work produced in Phase II may become classified. Max Rotation Speed (at full accuracy) = 25 rpm A key sub-system to an ESM is the RF transceiver, a single device which transmits and receives with the ability to exploit, RF signals. "Emerging technologies for high performance infrared detectors." OBJECTIVE: The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Access the web address for DIBBS at https://www.dibbs.bsm.dla.mil, then select the Tech Data Tab and Log into c-Folders. Phase I proposals will NOT be accepted for this topic. This is equivalent to approximately 500 Wh/kg (watt-hour per kilogram) (500 Wh/Kg / 12volts / 2.2lbs/kg x .84BatteryWeightInPounds = 15.909Ah) OBJECTIVE: Machine reasoning logic and semantic interoperability for contextual understanding, auto-alert cuing, and drilldown of anomalous events and activities in multidomain littoral zones. The prototypes, test samples, and characterization results should be delivered by the end of Phase II. Assess the capabilities of the proposed system for future expansion. 10.1016/S0003-2670(03)00177-6. Documentation to determine if Phase I feasibility has been met: DESCRIPTION: DLA R&D is looking to develop domestic capability to create a qualified Nodular Aluminum Powder and the availability of material supply for use at McAlester Army Ammunition Plant (MCAAP) and Joint Munitions Command (JMC). Hardware will demonstrate ability to receive control messaging with existing exercise control (EXCON) systems via stakeholder selected IP-based messaging protocol to enable centralized control of many devices from a central EXCON station. Remote control operation is designed for use at very slow speeds for parking and maintenance and are not suitable for convoy operations. (2014, June 29). 1. Champagne Jr., Victor and Helfritch, Dennis. Army Public Health Center (2022). 8. o Quad Core I7, 8th Gen or newer 2. The NCTLS should enable the following pilot workflow: PHASE III DUAL USE APPLICATIONS: Phase III efforts will align with the program of record to integrate the results of the Phase II work. Control of the device should be enabled via standard Internet Protocol (IP) network messaging (e.g., Transport Control Protocol User Datagram Protocol) on a separate network from tactical gear and support machine to machine control from other systems. Reuters. FEASIBILITY DOCUMENTATION: Offerors interested in participating in Direct to Phase II must include in their response to this topic Phase I feasibility documentation that substantiates the scientific and technical merit and Phase I feasibility described in Phase I above has been met (i.e., the small business must have performed Phase I-type research and development related to the topic NOT solely based on work performed under prior or ongoing federally funded SBIR/STTR work) and describe the potential commercialization applications. 627-634. PHASE II: Develop sticky foam material and process for prototype testing based on the result of the Phase I performance goals as defined in Phase II development plan. OBJECTIVE: Develop and improve modeling and simulation tools for predicting the performance of air-breathing propulsion systems within Navy-relevant hypersonic weapons systems. Application specific electronics can include, but are not limited to, custom printed circuit board design or application-specific integrated circuit (ASIC) development. JCP Certification is required to access Government Drawings and Data This is extremely important for ground platforms face a complex cluttered environment and are increasingly hindered by platform space and power constraints. Ship recognition requires significant examples to train the classifiers, but obtaining suitable training data is very time consuming, expensive, and impossible in many instances. Thorough field calibration of these systems, including the ability to adjust measurements for different environmental and background conditions, has proven difficult. U.S. Department of Defense. *This write-up mentions selected commercial products. The demonstration should include the ability for the observers to determine how the level of trustworthiness for a given device was measured (e.g., what specific device factors were used to determine the level of trustworthiness of the device, any configuration data used in the decision and how that data was mapped to a level of trustworthiness etc.). PHASE I: Determine a viable and robust method to increase the amount of data transferred or uplinked from U.S. Navy airborne ASW sensor systems to aircraft receivers. OBJECTIVE: DTRA seeks to develop a US-based, portable, open-architecture tablet designed for SOCOM ATAK users that is capable of visualizing and conducting real-time DNA or RNA sequencing in a tactical environment. The most common tracking schemes used in weapons systems combine feature and filtering methods. Figure 21: Pulse Secure . PHASE I: In Phase I, the investigation shall explore the underlying technologies used to enable an EM skin within the frequency range of 2-18 GHz. 12. As a part of this feasibility study, the proposers shall address all viable overall system design options with respective specifications on display resolution, display focus distance, display brightness, substrate light transmission, and overall system size/weight. This software should be able to georectify the data over open ocean when observing the earth at extreme slant angles. REFERENCES: 5, October 2021. The launcher along with the WallpaperPicker should be more stable now due to the fixes made to them too. The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. https://www.dodea.edu/Offices/PolicyAndLegislation/upload/DoDEA-AI-8510-01-Risk-Management-Framework.pdf Design concept should include required hardware, database/look up tables and types of tracking algorithms. PHASE I: Design a concept for a dual-mode surrogate seeker having both a passive RF sensor and an imaging IR sensor and demonstrate feasibility. 3. Gope, P., Millwood, O., Saxena, N., A provably secure authentication scheme for RFID-enabled UAV applications, Computer Communications, Volume 166, 2021, Pages 19-25, ISSN 0140-3664, https://doi.org/10.1016/j.comcom.2020.11.009 The utilization of magnetic fields has evidence of being effective in dispersing plasma sheaths, but the concept of a magnetic window has not yet been fully explored [Ref 3].Recently there has been some experiments reducing the plasma sheath using pulsed magnetic fields, however for smaller time frames than what is required for communications [Ref 5]. PHASE III DUAL USE APPLICATIONS: 1) Deliver a final prototype 2) Integrated Aerosol and Vapor Applications: Validate and Verify quantitation efforts, including a full-scale test, with a DoD, DoE Laboratory or commercial partner to integrate aerosol data with Hyperspectral Imaging data sets to account for total plume mass quantification. DESCRIPTION: To overcome limitations inherent in conventional image-based targeting systems, (e.g., visible and conventional thermal vision systems) a polarimetrically filtered SWIR camera system based on new high resolution FPA technology is to be developed. Embedded system designs are typically based on commodity hardware optimized exclusively for speed leading to critical cyber vulnerabilities that can have devastating effects on safety and mission effectiveness. Army engineers possess capabilities to acquire reconnaissance data from a suite of sensors housed in the Instrument Set, Reconnaissance and Surveying Toolkit (ENFIRE). A desire for the process to use friendly sources of feed materials is preferred but not required. https://www.routledge.com/Advanced-Digital-Optical-Communications/Binh/p/book/9781138749542 <>>> Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.